Hydroman® Submersible Clay Dredge Pump with Water Jet Ring…
Submersible clay dredge pump with water jet ring and cutter rings
Hydroman® Submersible Clay Dredge Pump with Water Jet Ring and Cutter Rings is extremely suitable for breaking up and picking up sediment in high-density, high-density mud, as the optional water jets and cutterheads are all designed for compacted, very dry, clayey materials or thick muds and sand. Submersible clay dredging pumps are equipped with cutters and a jet ring, which coupled with the agitator (fixed on the main shaft) stir the solids deposited on the bottom to be easily pumped and create a homogeneous mixture with a higher percentage of solids, obtaining greater efficiency.
Hydroman® CutPro® Dredge Pump Side Cutters are capable of increasing solids production and allowing dredging activities to be completed even in the most difficult situations. Dredge cutter heads are a unique mechanical mixing device added to the submersible dredge pump when the material is of significantly high viscosity or there is little or no free water. Similar to the operation of egg beaters, the side agitators added to the dredge will mix the material in real time decreasing the viscosity and thinning the material to optimize it for pumping.
Hydroman® iShot® high pressure water jet ring added to submersible dredge mud pump mount to add high pressure water near pump suction to further suspend settled solids by action of water jet from the nozzles. can be used as an alternative to hydraulic shears. The water jet ring can be used as an alternative to side agitators and head cutter for electric submersible dredge pump. This system consists of a jet-ring frame mounted on the submersible sludge pump filter, a high pressure submersible centrifugal sludge pump (available in electric and hydraulic versions), a suction pipe with filter water pump and non-return valve, and a discharge pipe. Spray ring nozzles are custom designed to fit the application.
Hydroman® Clay Dredging Submersible Pump with Water Jet Ring and Cutter Rings Typical Operating Areas：
Marinas, ports, loading docks
Open pit sludge removal
General severe dehydration
Dewatering of stockpiles
Manufacture of tunnels and channels
Cleaning and backfilling of trenches in cable-pipe projects
Borehole water evacuation
Reconquest of the beaches.